OXVA VPRIME 2 Review: Is This the New Benchmark for Powerful Pod Kits?

The line between a traditional pod kit and a full-powered sub-ohm vape has been getting increasingly difficult to define, and the new OXVA VPRIME 2 might be one of the clearest examples yet of why.

For years, vapers looking for substantial vapour, strong flavour and higher wattage typically accepted the size and complexity of a box mod and sub-ohm tank. Pod kits offered a more portable alternative, but there was usually a compromise somewhere: smaller batteries, lower power, restricted airflow or limited coil choice.

The OXVA VPRIME 2 appears designed specifically to close that gap.

With a substantial 3400mAh built-in battery, adjustable output up to 60W, new UniTech 3.0 Dual Mesh technology, Boost and Eco modes, an upgraded 0.98-inch colour display and remarkably fast auto-draw activation, this is considerably more than a simple refresh of the original VPRIME.

In fact, OXVA has increased the battery capacity from 2600mAh in the original VPRIME to 3400mAh in the VPRIME 2 while retaining the same maximum 60W output. The new model also introduces faster 5V/3A USB-C charging compared with the previous generation’s 5V/2A system.

But specifications only tell part of the story.

In this complete OXVA VPRIME 2 review, we are taking a closer look at what has actually changed, how the new Dual Mesh pods work, who the device is aimed at, whether existing VPRIME owners should upgrade and whether the VPRIME 2 deserves a place among the best high-powered pod kits available in the UK in 2026.

What Is the OXVA VPRIME 2?

The OXVA VPRIME 2 is a refillable pod vape designed to offer the power and airflow associated with a sub-ohm kit while retaining the straightforward usability of a modern pod system.

Its headline specification is undoubtedly the 3400mAh internal battery.

That is an unusually large capacity for a device in the pod category and represents a significant increase from the 2600mAh cell inside the original VPRIME.

Maximum output remains at 60W, giving the VPRIME 2 enough power to comfortably handle Direct-to-Lung (DTL) and Restricted Direct-to-Lung (RDTL) vaping when used with the appropriate pod.

The UK version uses TPD-compliant 2ml refillable pods. The VPRIME 2 kit supplied by The Vape Experts includes a 0.4Ω Dual Mesh pod and a 0.6Ω Dual Mesh pod, providing two noticeably different starting points depending on how you prefer to vape.

The main specifications include:

• 3400mAh built-in rechargeable battery
• Adjustable 5W-60W output
• 5V/3A USB-C fast charging
• UniTech 3.0 technology
• New VPRIME Dual Mesh pods
• 0.4Ω and 0.6Ω pods included
• 2ml TPD-compliant pod capacity in the UK
• Boost Mode
• Eco Mode
• 0.98-inch colour display
• Auto-draw activation
• Manual fire-button activation
• Adjustable airflow
• Compatibility with existing VPRIME pods
• Support for freebase and nicotine salt e-liquids
• DTL, RDTL and, with suitable VPRIME pod options, tighter vaping styles

OXVA also quotes an auto-draw response of approximately 0.01 seconds, meaning the VPRIME 2 is designed to deliver near-instant activation when you inhale.

That combination makes the VPRIME 2 unusual. It has the simplicity required for somebody moving up from a basic pod kit but enough power and adjustability to appeal to considerably more experienced vapers.

OXVA VPRIME 2 Design and Build Quality

The first VPRIME already had a more premium appearance than many conventional refillable pod kits, and OXVA has continued that direction with the VPRIME 2.

This is not intended to be an ultra-light stick-shaped pod.

The larger battery inevitably means a more substantial device, but that extra size serves a purpose. OXVA lists dimensions of approximately 113.12mm × 41.2mm × 27.7mm, with a weight around 150g.

In other words, it sits somewhere between a conventional compact pod and a small traditional vape mod.

For many users, that is likely to be exactly the point.

The VPRIME 2 is designed for people who want something substantial enough to provide serious battery life and power without carrying a separate mod, tank and removable battery setup.

The available finishes also give the kit considerably more personality than many black-or-silver pod systems.

At The Vape Experts, the current colour options include:

• Black Carbon
• Mirage Blue
• Mirage Pink
• Mirage Purple
• Shard Black
• Shard Gold

The Mirage finishes provide the more colourful choices, while Black Carbon should appeal to anyone wanting a cleaner and more understated appearance. Shard Black and Shard Gold take the styling in a slightly more distinctive direction.

It feels like OXVA understands that modern vape hardware has become something people carry every day. Design matters almost as much as specifications when a device spends hours in your hand, pocket, bag or on your desk.

The 3400mAh Battery Could Be the VPRIME 2’s Biggest Advantage

The battery is arguably the single biggest practical improvement in the OXVA VPRIME 2.

The original VPRIME already had a respectable 2600mAh battery. The new model increases that to 3400mAh.

That means an additional 800mAh of stated capacity, or roughly 31% more than the original model.

OXVA itself describes the increase as approximately 30%.

Why does that matter?

Because higher-powered pod kits can place significant demand on their batteries.

A small 800mAh or 1000mAh MTL device can last surprisingly well because it might only be operating at 10-20W. A DTL device running around 40W, 50W or towards 60W requires considerably more energy.

That has historically been one of the weaknesses of powerful pod mods.

You get the convenience of a pod system, but heavy use can mean carrying a charging cable everywhere you go.

The VPRIME 2’s 3400mAh capacity gives OXVA much more room to work with.

Actual battery life will always depend on factors including:

• Selected wattage
• Pod resistance
• Boost or Eco Mode
• Frequency of use
• Length of each puff
• Airflow setting
• Battery age
• Individual vaping habits

Someone vaping continuously near the device’s maximum output will naturally consume considerably more power than someone running a 0.6Ω pod at a moderate wattage.

Even so, 3400mAh provides a serious foundation for an everyday device.

For commuters, people working away from a charger, drivers, tradespeople or anyone simply fed up with regularly recharging their vape, that could be one of the VPRIME 2’s strongest selling points.

5V/3A Fast Charging Makes the Larger Battery More Practical

Increasing battery capacity can introduce another problem: charging a bigger battery takes longer.

OXVA appears to have anticipated that.

The original VPRIME used 5V/2A USB-C charging, while the VPRIME 2 increases this to 5V/3A.

According to OXVA’s current information, the VPRIME 2 can recover a substantial proportion of its battery relatively quickly, although published charging figures vary slightly between OXVA’s own launch and product materials. The important specification is the supported 5V/3A charging architecture.

That matters more than chasing an exact minute-by-minute figure.

A large internal battery is useful, but a large battery combined with genuinely fast USB-C charging is considerably more convenient.

Plugging the VPRIME 2 in during a lunch break, drive, desk session or evening should therefore be more useful than it would be with a slower charging system.

For a device clearly designed around higher-power everyday vaping, that feels like an essential upgrade rather than a luxury extra.

UniTech 3.0: What Has Actually Changed?

Battery capacity might be the most immediately obvious VPRIME 2 upgrade, but the bigger technical story is UniTech 3.0 and the new Dual Mesh pod system.

The original VPRIME used OXVA’s UniTech 2.0 platform.

With the VPRIME 2, OXVA has redesigned the pod and airflow architecture around UniTech 3.0.

One of the most notable changes is what OXVA describes as a U-shaped airway.

Instead of simply pushing air directly through a conventional chamber, the redesigned internal structure is intended to control airflow more smoothly as it passes through the pod.

The objective is straightforward: more consistent airflow, improved atomisation and reduced opportunities for liquid or condensation to make its way where it should not.

Leaks and condensation remain two of the biggest complaints surrounding refillable pod systems.

Even an otherwise excellent device becomes irritating if users constantly find liquid underneath the pod or around the contacts.

OXVA claims that the VPRIME 2’s UniTech 3.0 construction provides improved leak protection over the previous generation. The exact percentages used in OXVA’s promotional material vary between pages, so we would treat those figures as manufacturer marketing claims rather than an independent measurement. What matters is that leak resistance has clearly been a major engineering focus for this generation.

That is arguably more meaningful to most everyday users than another flashy screen animation.

Dual Mesh Pods Are the Real Performance Upgrade

The VPRIME 2 introduces dedicated Dual Mesh cartridges.

Traditional mesh coils already transformed modern vaping because the mesh structure provides a relatively large and even heating surface.

Dual Mesh takes that idea further.

Rather than relying on a single heating element, the new architecture is intended to distribute heat more effectively and create more consistent vapour across the life of the pod.

OXVA makes some very bold claims around the system, advertising figures including “200% flavour” and “200% lifespan” for the new Dual Mesh design. Those are OXVA’s own comparative performance claims and should not be interpreted as meaning flavour can objectively be measured as exactly twice as good for every user.

Taste is subjective.

E-liquid composition, wattage, airflow, nicotine strength, sweetener content and individual preference all affect the experience.

What is more useful is the underlying design principle.

Dual Mesh should help the pod heat e-liquid evenly, maintain consistency during longer sessions and provide the dense vapour expected from a higher-powered pod kit.

That matters particularly for DTL and RDTL users, where flavour can sometimes become muddled when a coil struggles to maintain even heat across repeated draws.

0.4Ω vs 0.6Ω VPRIME 2 Pods

The UK OXVA VPRIME 2 kit comes with two 2ml Dual Mesh pods.

0.4Ω Dual Mesh Pod

The 0.4Ω option is the more performance-focused of the two included pods.

Expect:

• A warmer vape
• Greater vapour production
• A more open RDTL or DTL draw
• Higher operating power
• Strong flavour intensity
• Better suitability for higher-VG e-liquid

The Vape Experts recommends the 0.4Ω pod particularly for higher-VG blends such as 70VG/30PG e-liquid.

For somebody buying the VPRIME 2 specifically because they want something approaching sub-ohm tank performance without carrying a conventional mod and tank, the 0.4Ω Dual Mesh pod will probably be the natural starting point.

0.6Ω Dual Mesh Pod

The 0.6Ω option pulls the VPRIME 2 towards the more restrained side of its personality.

Compared with the 0.4Ω pod, it should offer:

• A slightly tighter draw
• Lower power consumption
• Reduced vapour production
• Cooler operation
• Strong RDTL performance
• Greater suitability for 50/50 e-liquids

The Vape Experts currently recommends the 0.6Ω option particularly for 50VG/50PG blends.

That makes the VPRIME 2 considerably more flexible than a device designed purely for maximum-cloud DTL vaping.

Boost Mode vs Eco Mode

One of the most important additions to the VPRIME 2 is the ability to choose between Boost and Eco operating modes when using the new Dual Mesh cartridges.

The names explain the basic idea.

Boost Mode

Boost Mode prioritises performance.

This is the mode for users who want:

• Stronger output
• Faster-feeling ramp-up
• Denser vapour
• A warmer inhale
• Maximum flavour intensity from the pod

If your reason for buying the VPRIME 2 is to get close to a traditional sub-ohm experience from a pod platform, Boost Mode is likely where you will spend plenty of your time.

Eco Mode

Eco Mode moves the emphasis towards efficiency.

That makes more sense when:

• Battery life is important
• You are away from a charger
• You want a calmer vape
• You want to reduce overall power consumption
• Maximum cloud production is unnecessary

It also highlights an important part of the VPRIME 2’s appeal.

You are not locked into one style of vaping.

A user could run Boost Mode during an evening at home, switch to Eco while travelling and adjust the airflow or wattage depending on the situation.

That level of control is what separates the VPRIME 2 from many simpler pod kits.

60W Maximum Power: Is That Enough?

Absolutely, for the type of device OXVA is building.

It would be easy to look at traditional vape mods capable of 100W, 150W or 200W and assume more power automatically means better performance.

It does not.

Wattage has to be considered alongside the coil and airflow system.

The VPRIME 2’s pods are designed to work within the device’s 5-60W output range. There is little value in fitting a 120W chipset if the corresponding pod never requires anything close to that output.

Sixty watts is already substantial for a compact pod device.

It gives the VPRIME 2 enough headroom for warm, high-vapour DTL performance while avoiding pointless specification inflation.

More importantly, the device can intelligently match suitable power to the installed pod while still providing adjustment for users who want more control.

For many vapers, 60W in a properly designed mesh pod is more useful than 150W on a spec sheet.

The 0.98-Inch Dynamic Colour Screen

Screens on vaping devices can range from genuinely useful to entirely unnecessary.

The VPRIME 2’s 0.98-inch colour display falls into the useful category because this is a device with enough adjustment to justify providing proper information.

You can quickly monitor key settings rather than trying to interpret combinations of flashing LEDs.

The display complements the VPRIME 2’s positioning nicely.

This is not an entry-level device stripped down to one light and one airflow hole. It is designed to provide a more complete interface while remaining considerably easier to operate than many traditional vape mods.

Interestingly, the screen has only increased slightly in size from the original VPRIME’s 0.96-inch display.

That tells us something about OXVA’s priorities.

This generation is not simply about making the screen bigger. The genuinely important upgrades are happening inside the device and pod.

0.01-Second Auto-Draw and Button Activation

Auto-draw is common in lower-powered MTL pod systems.

It is much less impressive when attempted poorly on a higher-powered DTL device.

OXVA was already pushing auto-draw heavily with the original VPRIME, and the VPRIME 2 continues that approach.

The manufacturer specifies activation in approximately 0.01 seconds using its airflow sensor.

In practical terms, the aim is for vapour production to begin almost immediately when you inhale.

That matters because any noticeable delay becomes considerably more obvious with a powerful DTL inhale than it does on a small low-wattage device.

OXVA has also retained conventional button firing.

We like that decision.

Auto-draw is extremely convenient, but forcing every user to rely exclusively on it would unnecessarily restrict the device.

With both systems available, you can use whichever feels most natural.

Adjustable Airflow Makes a Major Difference

Airflow is one of the easiest specifications to overlook when comparing vape kits.

It is also one of the most important.

A 60W device with fixed restrictive airflow would never deliver a convincing DTL experience.

The VPRIME 2 includes adjustable side airflow, allowing you to control how much air enters during a draw.

Open the airflow and the vape becomes looser and airier.

Close it down and the draw becomes progressively more restricted.

Combined with different pod resistances and adjustable wattage, this gives users considerably more control over the final result.

That is especially useful if you sit somewhere between traditional MTL and completely open DTL vaping.

Rather than changing devices, you can potentially tune the VPRIME 2 towards the experience you actually prefer.

OXVA VPRIME 2 vs Original VPRIME

This is where the new model becomes particularly interesting.

The first VPRIME was already an unusually capable pod device. The VPRIME 2 therefore needed meaningful improvements to justify existing owners upgrading.

Here are the main differences.

Battery

Original VPRIME: 2600mAh

VPRIME 2: 3400mAh

Winner: VPRIME 2

The extra 800mAh is one of the clearest upgrades.

Maximum Output

Original VPRIME: 60W

VPRIME 2: 60W

Winner: Draw

OXVA has not chased higher headline wattage because the new model does not really need it.

Charging

Original VPRIME: 5V/2A

VPRIME 2: 5V/3A

Winner: VPRIME 2

Faster charging becomes particularly important when battery capacity also increases.

Coil Technology

Original VPRIME: UniTech 2.0

VPRIME 2: UniTech 3.0 Dual Mesh

Winner: VPRIME 2

This is arguably the most important performance change.

Screen

Original VPRIME: 0.96-inch colour display

VPRIME 2: 0.98-inch colour display

Winner: VPRIME 2, but only marginally

The difference in physical screen size is minor.

Operating Modes

Original VPRIME: Conventional adjustable operation

VPRIME 2: Boost and Eco modes with compatible Dual Mesh pods

Winner: VPRIME 2

The modes allow the second generation to adapt more clearly between maximum performance and efficiency.

Pod Compatibility

This is where OXVA has made a particularly customer-friendly decision.

The VPRIME 2 retains compatibility with the existing VPRIME pod range.

Existing owners therefore do not necessarily have to abandon pods they already use simply because they upgrade the device.

Should Existing VPRIME Users Upgrade?

If your original VPRIME is working perfectly and you are happy with its battery life, there is no reason to pretend an immediate upgrade is essential.

The first device remains capable.

However, the VPRIME 2 becomes much easier to recommend if any of the following matter to you:

• You regularly run out of battery
• You want faster charging
• You want the new Dual Mesh pod system
• You want Boost and Eco modes
• You regularly vape DTL or RDTL
• You want improved leak resistance
• You want more battery capacity without moving to a conventional mod
• You want to retain compatibility with existing VPRIME pods

The extra battery capacity alone is meaningful.

Combined with the new pod architecture, however, the VPRIME 2 feels less like an annual cosmetic update and more like a proper second generation.

Is the OXVA VPRIME 2 Suitable for Beginners?

This needs a little nuance.

The VPRIME 2 is easy enough to operate for someone relatively new to vaping, but that does not automatically mean it is the ideal first vape for every new user.

Someone who has just stopped smoking and wants a tight cigarette-style inhale may be better suited to a simpler MTL pod kit.

The VPRIME 2 really comes into its own for:

• Existing pod users wanting more power
• RDTL vapers
• DTL vapers
• Users moving away from larger sub-ohm mods
• Vapers wanting long battery life
• People who value adjustable wattage and airflow
• Existing OXVA VPRIME owners

The smart power adjustment, auto-draw and integrated-coil pods keep operation straightforward, so you do not need to be an expert to use it.

There is simply more performance available than many beginners will need.

What E-Liquid Should You Use in the OXVA VPRIME 2?

Your pod choice should influence your e-liquid choice.

With the 0.4Ω Dual Mesh pod, higher-VG e-liquid such as 70VG/30PG is the obvious combination for users wanting stronger DTL or RDTL performance.

Higher VG typically produces denser vapour and suits lower-resistance setups designed for greater airflow.

The 0.6Ω Dual Mesh pod provides more flexibility with 50/50 liquids and a more restricted vaping style.

Nicotine strength also matters.

A powerful DTL setup produces considerably more vapour per inhale than a low-wattage MTL pod, so using very high nicotine concentrations in a high-powered setup may be unpleasant.

Always choose an e-liquid and nicotine strength appropriate for your pod, wattage and personal requirements.

If you are unsure, the team at The Vape Experts can help you match the correct e-liquid type to your VPRIME 2 setup.

Is the OXVA VPRIME 2 Good for Sub-Ohm Vaping?

This is arguably the central question of our OXVA VPRIME 2 review.

The answer is yes, particularly if what you want is sub-ohm-style performance without returning to a large tank and mod.

The combination of:

• Up to 60W power
• 0.4Ω Dual Mesh pod
• Adjustable airflow
• Boost Mode
• Large 3400mAh battery
• Fast charging
• Dual Mesh heating

gives the VPRIME 2 the ingredients required for a convincing DTL experience.

A dedicated enthusiast-grade rebuildable setup will still provide levels of customisation that a pod system cannot replicate.

But that is not really the target.

The VPRIME 2 is about reducing complexity.

Fill a pod, set your airflow and power, then vape.

No separate tank.

No external battery charger.

No manually replacing coil heads inside a tank.

No rebuilding.

For a large number of users, that convenience will outweigh the additional flexibility offered by traditional hardware.

OXVA VPRIME 2 Frequently Asked Questions

How powerful is the OXVA VPRIME 2?

The VPRIME 2 has an adjustable output range of 5W to 60W.

What size battery does the VPRIME 2 use?

It contains a built-in 3400mAh rechargeable battery, an increase from the original VPRIME’s 2600mAh battery.

Does the OXVA VPRIME 2 use USB-C?

Yes. It supports USB-C charging at up to 5V/3A.

What pods come with the UK VPRIME 2?

The UK kit from The Vape Experts includes a 2ml 0.4Ω VPRIME Dual Mesh pod and a 2ml 0.6Ω VPRIME Dual Mesh pod.

Is the UK VPRIME 2 pod 2ml or 6ml?

The UK TPD-compliant version uses 2ml pods. You may see 6ml specifications on international websites because the standard non-TPD version has a larger capacity. OXVA specifically lists a 2ml version for TPD markets.

Can you use original VPRIME pods in the VPRIME 2?

Yes. OXVA VPRIME 2 retains compatibility with the wider VPRIME pod range.

Does the VPRIME 2 have auto-draw?

Yes. OXVA specifies approximately 0.01-second auto-draw activation, and the device can also be activated using the fire button.

What is Boost Mode?

Boost Mode prioritises stronger performance, denser vapour and a more powerful vaping experience.

What is Eco Mode?

Eco Mode prioritises efficiency, helping reduce power consumption when maximum performance is unnecessary.

Is the VPRIME 2 good for DTL vaping?

Yes. Its 60W maximum output, adjustable airflow and low-resistance Dual Mesh pods make DTL and RDTL vaping a major focus of the device.

Can you use nic salts in the VPRIME 2?

The platform supports both nicotine salt and freebase liquids, although the appropriate nicotine strength, VG/PG ratio, resistance and wattage should always be matched carefully.

What colours does the OXVA VPRIME 2 come in?

The Vape Experts currently offers Black Carbon, Mirage Blue, Mirage Pink, Mirage Purple, Shard Black and Shard Gold.

Where Can You Buy the OXVA VPRIME 2 in the UK?

The OXVA VPRIME 2 is available now from The Vape Experts.

At the time of writing, the OXVA VPRIME 2 Vape Kit is listed at £29.99, making it a particularly interesting proposition considering its 3400mAh battery, 60W output and new Dual Mesh hardware.

The Vape Experts is an independent UK vape retailer based in Redruth, Cornwall, with nationwide online delivery.

Customers in Cornwall can visit the physical Redruth vape shop, while online orders are available throughout the UK.

The Vape Experts also operates a VIP rewards programme, giving returning customers opportunities to collect points and redeem rewards on future purchases.

For anyone searching online for an OXVA VPRIME 2 in Cornwall, Oxford, London, Birmingham, Dorset, Manchester, York, Newcastle, Edinburgh or elsewhere across the UK, The Vape Experts provides nationwide access without pretending to operate physical shops in locations where it does not.

That distinction matters.

The physical store is based in Redruth, while online delivery extends throughout the country.

OXVA VPRIME 2 Review: Our Final Verdict

The OXVA VPRIME 2 makes a strong case for the idea that modern pod systems no longer need to feel like compromises.

There was a time when choosing a pod meant accepting less battery capacity, less power and less flexibility in exchange for convenience.

The VPRIME 2 turns much of that assumption on its head.

A 3400mAh battery is substantial by pod-system standards.

Sixty watts provides more than enough output for serious RDTL and DTL vaping.

The new UniTech 3.0 Dual Mesh platform tackles the part of the device that ultimately matters most: how consistently it actually vaporises e-liquid.

Then there are the quality-of-life improvements.

5V/3A fast charging.

Boost and Eco modes.

Adjustable airflow.

Automatic and button firing.

A proper colour screen.

Existing VPRIME pod compatibility.

And a UK-compliant 2ml Dual Mesh setup that keeps the system straightforward rather than forcing users into replaceable coil assemblies.

The VPRIME 2 is not necessarily the device we would recommend to someone wanting the smallest possible MTL vape.

That is not what it is trying to be.

Instead, this is a device for people who look at conventional pod kits and think, “I want more.”

More battery.

More airflow.

More vapour.

More power.

More control.

But crucially, without dramatically increasing complexity.

Existing VPRIME owners get one of the most meaningful battery upgrades we have seen between two generations of the same pod series, going from 2600mAh to 3400mAh while retaining compatibility with the broader pod ecosystem.

Users coming from older sub-ohm setups, meanwhile, may discover that carrying a bulky mod and tank is no longer necessary to get the kind of performance they enjoy.

And people moving upwards from smaller refillable pods gain significantly more headroom without stepping immediately into enthusiast hardware.

That is where the OXVA VPRIME 2 makes the most sense.

It occupies the increasingly important middle ground between simple refillable pods and traditional sub-ohm vape kits, and it does so with specifications that feel genuinely useful rather than designed purely to win a comparison table.

At £29.99 from The Vape Experts at the time of writing, it is also positioned aggressively enough to make the upgrade considerably easier to justify.

If you want maximum portability above everything else, there are smaller options.

If you want extensive rebuildable customisation, there are more advanced options.

But if you want a powerful refillable pod with serious battery capacity, fast charging, adjustable airflow and modern Dual Mesh performance, the OXVA VPRIME 2 deserves serious consideration.

For us, the 3400mAh battery might attract the initial attention, but the complete package is what makes the device interesting.

OXVA has not simply made the VPRIME bigger.

It has addressed battery endurance, charging speed, pod architecture, operating flexibility and everyday usability at the same time.

And that is exactly what a second-generation product should do.

More at The Vape Experts, serving locations such as Redruth, Truro, Newquay, Penzance, Cornwall, Poole, Dorset, Oxford, Birmingham, Derby, York, Newcastle, Edinburgh, London, Surrey and more.

The OXVA VPRIME 2 and all vaping products are intended for adults aged 18 and over only. Vaping products containing nicotine are addictive and are not intended for children or non-smokers.